NITRO BATT 12N554A with acid pack
Any batteries with acid packs will be filled prior to collection to comply with the government regulations
All standard and high cranking (YB) Nitro batteries comes with an individual adapted acid bottle. The right mixture and the right volume of sulfuric acid packed together with your battery.
- No need for seperate battery acid
- Right acid with the right volume packed toegther with the battery
- Highest engineering standards and construction quality
- Widest model range of the aftermarket
Please note: This battery should never be fitted on it's side. It is only suitable for vertical fitment
Most problems with batteries today are due to improper initial activation. Newly activated batteries should ALWAYS be CHARGED before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems.
Failure caused by incorrect activation or charging is NOT a warranty issue.
- Fill the battery to the indicated level
- Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
Barcode: 5414837157311
Nitro 12N5.5-4A Battery
Also available in set case quantities of 6.
- Width:60 mm
- Height:130 mm
- Acid Type:acid pack
- Battery No.:12N554A
- Capacity:5.5 Ah
- Length:135 mm
- Voltage:12 volts
- Width:60 mm
- Height:130 mm
- Acid Type:acid pack
- Battery No.:12N554A
- Capacity:5.5 Ah
- Length:135 mm
- Voltage:12 volts
Fits:
For full fitment details in a searchable list please check the FITMENTS tab.
- Kawasaki: EL 250Chopper, H1 500E, H1 500F, H2 750A, H2 750B, H2 750Mach IV, KH 250B4, KH 250B6, KH 400, KH 500A8, S1 250, S1 250A1, S1 250A2, S1 250A3, S1 250C, S2 350A, S2 350B, S3 400