YUASA 6N6-1D-2-6V - Dry Cell, No Acid Pack

The Conventional 6 Volt battery is the industry standard for motorcycles, snowmobiles and ride-on mowers.

• Specifically designed to protect against seepage and corrosion
• Made to withstand vibration
• Through-partition construction delivers maximum power while the unique sealed posts resist corrosion for a longer battery life

Please note: This battery should never be fitted on it's side. It is only suitable for vertical fitment

Most problems with batteries today are due to improper initial activation.
Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems

• Fill the battery to the indicated level
• Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
• Failure caused by incorrect activation or charging is not covered by the warranty

Further research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by SULFATION. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is not caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use

Battery Yuasa 6N6-1D-2-6V - Dry Cell/ No Acid Pack

Also available in set case quantities of 10.

Fitment Summary
Compatible with 57 models (yearly).

• Kawasaki: KC 100C, KE 100A, KE 100B, KE 125A10, KE 125A3, KE 125A4, KE 125A5, KE 125A6, KE 125A7, KE 125A8, KE 125A9, KE 175B, KE 250B1, KE 250B2, KL 250A/C, KM 100A, KM 90A, KS 125